A fast drying reputation isn’t all Intercure® HS is renowned for. Complete with MIO, this primer/intermediate can improve your productivity and lower your. Allow appropriate loss factors. Airless Spray, Air Spray, Brush, Roller. PRACTICAL. INFORMATION FOR. INTERCURE Colour. Gloss Level. Volume Solids. A fast drying reputation isn’t all International Intercure HS is renowned for. Complete with MIO, this Fast cure anti-corrosive primer/intermediate with added.
|Published (Last):||18 March 2013|
|PDF File Size:||16.18 Mb|
|ePub File Size:||2.83 Mb|
|Price:||Free* [*Free Regsitration Required]|
Mouse over image to zoom. Be the first to write a review for this product! Provides quick cure even at low temperatures often encountered in maintenance painting.
Always mix a complete unit in the proportions supplied. Offers excellent barrier protection, low temperature cure and rapid overcoating properties.
GTA Do not thin more than allowed by local environmental legislation Mix ratio: Typical Coverage per coat. Surface defects revealed by the blast cleaning intrecure should be ground, filled, or treated in the appropriate manner. It is your responsibility to read the Product Data Sheets available below before you place an order and prior to application of the product.
This product must only be thinned using recommended International GTA thinners. Press and move to zoom.
Intercure HS will normally be applied to suitably prepared steel, e. As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person and not digitally to ensure that the colour is acceptable for its purposes.
I would like to hear about offers and services: Prior to paint application, all surfaces should be assessed and treated in accordance with ISO However, if necessary, application over prefabrication blast primers can be performed.
It is good working practice to periodically flush out spray equipment during the course of the working day. Excessive over application of material on areas such as poorly prepared welds may result in long term stress cracking and so early failure.
However, if necessary, application over prefabrication blast primers can be performed. Surface preparation All surfaces to be coated should be clean, dry and free from contamination. Your browser does not support automatic copy to clipboard. Warning Intercure HS is preferred for use with intercuree for chemical environments where zinc based materials can be subject to attack in both acidic and alkaline conditions.
This product is no longer in stock Red.
International Paint Ltd Web: Over-application of Intercure HS will extend both the minimum overcoating periods and handling times, and may be detrimental to long term overcoating properties. Low molecular weight reactive additives, which will form part of the film during normal ambient cure conditions, will also effect VOC values determined using EPA Method Provides quick cure even at low temperatures often encountered in maintenance painting.
At low temperatures, it may be necessary to thin Intercure HS to hhs airless apray application to be performed. Intercure HS can also be used as a primer for substrates other than blasted steel, e.
Over-application should be avoided as thick films will not be as good a substrate for topcoat adhesion after ageing as those at the specified thickness. This product is not available in pale and pastel shades due to a tendency to discolour rapidly.
A fast drying reputation isn’t all International Intercure HS is renowned for. Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Once the unit has intercuer mixed, it must be used within the working pot life specified. Systems compatibility Intercure HS will normally be applied to suitably prepared steel, e.
It intfrcure also be used as a primer for substrates other than blasted steel, e.
Once units of paint have been mixed they should not be resealed and it is advised that 20 prolonged stoppages work recommences with freshly mixed units. These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances.
If the shop primer shows extensive or widely scattered breakdown overall sweep blasting maybe necessary. Suitable for overcoating within 7 hours in most climatic conditions hence speeding up production and throughput in fabrication shops.
INTERCURE HS – SAND (KIT / 4G) – L
Intercure HS is suitable for application to blast cleaned surfaces which were initially to the above standard but have been allowed to deteriorate under good shop conditions for up to days. Low trade prices Our best trade prices on everything! Absolute measured adhesion of topcoats to aged Intercure HS is less than that to fresh material, however, it is adequate for the specified end use. The surface may deteriorate to Sa2 standard but must be free from loose powdery deposits.